For the upcoming archery season, you might need a new bow or a new bow sight. Correcting your bow sight will let you aim at your target precisely.
The latest bows available in the market are accurate, but sometimes they lack precision, and you need to sight again.
If your arrows are hitting the same spot again and again but are not hitting where you are aiming, then scroll through this article to ensure your bow is well-sighted.
Page Contents
How to Sight in a Compound Bow?
Learning about how to sight in a compound bow is an essential archery skill; every archer should know this technique if they want to excel in this skill. Gaining accuracy and precision is all your need when you consider learning sighting in archery.
You can follow some tips and keep in mind when you are sighting in a compound bow; do not always stand too close to the target to adjust the sight. Standing close to the sight gives you a little perspective about where your arrows are hitting and how far you are from the target. Get out of your comfort zone and don’t hit at the same spot continuously, and be in your best form when you shoot. Take some time to make some good shots and adequately adjust your sight.
Practice makes a man perfect, and you can also say that practice makes an archer perfect. Archery is all about practicing that leads you toward perfection. Before sighting your compound, if you line up your bowstring with the sight pins in a vertical position, you can save arrows that will consume in the compound bow shooting later, and some get off too much and are difficult to find later.
Why Do You Need Sight in A Compound Bow?
Before we jump to the steps about sighting in a compound bow, be clear about why you need to see in a compound bow. Sight in a compound is necessary to know where you are hitting your arrow and that you are hitting on the right spot. Some general techniques and steps will make you a sight pro if you thoroughly follow these steps and add a little practice to perfection.
Mostly when you are a beginner and buy a new bow from a shot, the archery shop pro will adjust the sight for you. But you can also master this technique with time if you want to become a pro; this will require essential equipment such as an Allen wrench to loosen the screen and other accessories to adjust the sight according to your style.
How To Properly Sight in a Compound Bow?
You should know that sighting in a compound bow differs according to different individuals during their shooting. Every person sights his bow in a different way that suits him only. If a person uses someone else’s sighted compound bow, the draw length, draw weight, and the arrows used with the bow will not be compatible with the new person. Every person is different, and their adjustments are according to themselves, which does not fit everyone.
Before starting the sighting process in a compound bow, line up the bowstring with the pins of the sight vertically; this helps save your arrows when you see from your compound bow to prevent them from going off, and you can perfectly see where every shot is going. If you like the bowstring up with the center of the arrow and the sight, adjust the pins accordingly, and you will not have to draw the string back. Do not overtight the screws; this can damage your sight and bow.
After buying a sight and attaching it to your bow, let it rest one night before you start shooting with it. There might be some changes that you will have to do with the sight of the other; you might tighten the screws or loosen them to adjust them according to your style. You can also adjust the sighting pins to the mid-point to gain some extra space to adjust. Use an Allen wrench to adjust these sights in a compound bow.
When you are sighting from a compound bow, you also need to notice some other things; keep your form, stance, anchor point, and grip in proper shape. If you want precision and accuracy in your shooting, shoot a group of arrows that will help you relieve from bad form wobble, distance error, wind, grip vault, and bow camber. Once you get rid of the wrong form, you can adjust the sight easily. Do not trust just one shot; you will have to make multiple shots for accuracy and precision.
How To Zero in a Compound Bow?
Stand at a distance of 10 yards from the target; this will reduce the risk of losing the arrow from the target and help you locate your arrows. For this purpose, use the first pin of the peep sight to look into the target from your bow and shoot some arrows at the target.
Follow your arrows when you are sighting in a compound bow. Start shooting with one axis, and if you shoot to the right below the spot, you need to adjust the whole sight according to your proper posture. After this, you can go to the vertical axis and vice versa.
Slowly increase the distance to 20 yards; when you decide to zero your compound bow at this distance, it might be tricky as the distance is increased now. Do not add another pin because the distance increased is only 10 yards.
Now shoot some arrows and notice the flight of your arrows. Some arrows might drop because the distance is more significant now. After noticing your flight, adjust your sight with the help of your wrench. After some time, you can hit the sight where you want to. Now, you can say that you have successfully zeroed your compound bow.
How To Sight in Compound Bow Pins?
After this, you will not have to adjust your sight entirely after a little increase in the distance. You can maintain the sight with the help of adding pins. As you needed a zeroed pin at 20 yards, you will have to increase the pins to 25,30,35 and 40 yards and the number of pins will keep increasing. Do not stand at a distance farther than 25 or 30 yards to make the targe hitting possible humanely. Here is a detail on sighting a compound bow with a single pin and multipin sight.
How To Sight in a Single Pin Compound Bow?
Single-pin sight adjustment can be trickier sometimes because it is difficult to measure the starting adjustments. For the single-pin sights, the archer must adjust the scope housing up and down to shoot at different distances. A sight tape, also known as a yardage guide, helps to fix the sight body to your desired distance. This indicator will move for the adjustment between pre-set distances to make the shooting more precise.
Single-pin sights usually come with multiple pre-printed sight tapes that may differ on arrow speeds. Archer knows enough to decide which tape will work best for his shootings. To sight in a compound bow with 2 pins, stand at 20 yards and hit an arrow from your target; if you use 1 pin from the top, your arrow will hit the target a little low. Now stand at 10 yards and see your arrow flight; the arrow will go low again. You can adjust your pin horizontally and vertically and wait until you hit the same target more than once. Repeat the process to gain accuracy.
You can slowly increase the distance by going to 40 yards and repeating the above process. You can use your pre-printed sight tapes and line them up at 20,40, and 60 yards and practice on different distances with a single pin; the moving indicators will let you measure the precision.
How To Sight in Multiple Pin Compound Bow?
For multipin, you might have 2,3,4, or 5 pins, and you can change your aiming distance while shooting with these pins. To sight in a compound bow with 5 pins, you can stand at a distance ranging from 20 to 60 yards.
At the 20-yard distance, 5 pins will be the maximum and highest aiming reference; at the 60 yards, using 5 pins will be the minimum and lowest aiming reference in a compound bow. Now align each pin on different yards, such as 1st pin for 10 yards, 2nd for 20 yards, and so on.
Take your first shot at 10 yards with the top peep sight or the first pin and shoot the target; make sure you have space down and on the left and right to adjust the sight after some time. Move the sight where your arrows are generally hitting; if your arrow is hitting high, move the pin-up, and if the arrow mostly goes towards your right, move your pin to the right.
You can now use your 20-yard pin near the top of the score to have enough room in the scope to adjust it accordingly. This way, you can adequately level your scope and arrange pins vertically after zeroing your 20-yard pin. In the end, arrange all 30,40,50, and 60 pins in the exact vertical directions of the 20 yards to make a straight, perfectly aimed shot.
How To Sight in A Pse Compound Bow?
To sight in a Pse Compound bow, make sure you shoot the bow on the same site where you are pointing your bow. If you are grouping to the left, ease your sight to the left and vice versa. Now take 4 to 5 shots and notice them all. Now adjust your sight by loosening the screws at your sight and then tightening it again. Now shoot more and notice the changes.
How To Sight in A Barnett Vortex Compound Bow?
A Barnett vortex compound bow is similar to other compound bows; a Barnett bow is a bit noisy and needs a stabilizer to balance the compound, and then it will become more comfortable to shoot. It has a different minimum draw weight. Using an Allen wrench and other equipment, you can adjust the sight in a Barnett Vortex compound bow similarly to other compound bows.
How To Sight in A Compound Bow 1 Pin?
Stand at 10 yards from the target. The single pin adjustment requires one aiming point; in this targeting, you only use the peep sight on the top. You can only adjust that one pin to move up or down to match the distance of your target.
How To Sight in A Compound Bow 2 Pin?
You get 2 different sights in this arming, and you have to stand 20 yards away from the field. There should be a 10-yard difference from the 1-pin target aiming to sight with 2 pins.
How To Sight in A Compound Bow 3 Pin?
You can learn to sight a compound bow with 3 pins by shifting the distance to 30 yards. There should always be a 10-yard difference between each pin. With the help of three pins, you can locate and aim at your target better than with single and 2 pins.
How To Sight in A Compound Bow 4 Pin?
You can sight with 4 pins by standing at 40 yards. For the 40-yard pin, look at the difference between the 20 and 30-yard pins. Now, move your third-highest pin, and make the distance between 30 and 40 yards exactly like 20 and 30 yards.
How To Sight in A Compound Bow 5 Pin?
You can sight in a compound bow with 5 pins by standing at a distance ranging from 20 to 60 yards. At the 20-yard distance, 5 pins will be the maximum and highest aiming reference; at the 60 yards, using 5 pins will be the minimum and lowest aiming reference in a compound bow.
